Datasheet

PIC18(L)F2X/45K50
DS30684A-page 466  2012 Microchip Technology Inc.
29.4 DC Characteristics: RC Idle Supply Current, PIC18(L)F2X/45K50
PIC18LF2X/45K50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C
PIC18F2X/45K50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C
Param
No.
Device Characteristics Typ Max Units Conditions
D045 Supply Current (I
DD)
(1),(2)
0.5 18 A -40°C VDD = 1.8V FOSC = 31 kHz
(RC_IDLE mode,
INTRC source)
0.6 18 A+25°C
0.7 — A+60°C
0.75 20 A+85°C
D046
1.1 20 A -40°C V
DD = 3.0V
1.2 20 A+25°C
1.3 — A+60°C
1.4 22 A+85°C
D047
17 30 A -40°C VDD = 2.3V FOSC = 31 kHz
(RC_IDLE mode,
INTRC source)
13 30 A +25°C
14 30 A +85°C
D048
19 35 A -40°C VDD = 3.0V
15 35 A +25°C
16 35 A +85°C
D049
21 40 A -40°C VDD = 5.0V
15 40 A +25°C
16 40 A +85°C
Note 1: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
Test condition: All Peripheral Module Control bits in PMD0 and PMD1 set to ‘1’.
2: The test conditions for all I
DD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR
= VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).