Datasheet

 2012 Microchip Technology Inc. DS30684A-page 389
PIC18(L)F2X/45K50
REGISTER 26-3: CONFIG2L: CONFIGURATION REGISTER 2 LOW
U-0 R/P-1 U-0 R/P-1 R/P-1 R/P-1 R/P-1 R/P-1
— LPBOR — BORV<1:0>
(1)
BOREN<1:0>
(2)
PWRTEN
(2)
bit 7 bit 0
Legend:
R = Readable bit P = Programmable bit U = Unimplemented bit, read as ‘0’
-n = Value when device is unprogrammed x = Bit is unknown
bit 7 Unimplemented: Read as ‘0’
bit 6 LPBOR: Low-Power Brown-out Reset Enable bits
1 = Low-Power Brown-out Reset disabled
0 = Low-Power Brown-out Reset enabled
bit 5 Unimplemented: Read as ‘0’
bit 4-3 BORV<1:0>: Brown-out Reset Voltage bits
(1)
11 = VBOR set to 1.9V nominal
10 = V
BOR set to 2.2V nominal
01 = V
BOR set to 2.5V nominal
00 = V
BOR set to 2.85V nominal
bit 2-1 BOREN<1:0>: Brown-out Reset Enable bits
(2)
11 = Brown-out Reset enabled in hardware only (SBOREN is disabled)
10 = Brown-out Reset enabled in hardware only and disabled in Sleep mode
(SBOREN is disabled)
01 = Brown-out Reset enabled and controlled by software (SBOREN is enabled)
00 = Brown-out Reset disabled in hardware and software
bit 0 PWRTEN
: Power-up Timer Enable bit
(2)
1 = PWRT disabled
0 = PWRT enabled
Note 1: See Section 29.1 “DC Characteristics: Supply Voltage, PIC18(L)F2X/45K50” for specifications.
2: The Power-up Timer is decoupled from Brown-out Reset, allowing these features to be independently controlled.