Information

PIC18F46J50 FAMILY
DS80436D-page 8  2011 Microchip Technology Inc.
Data Sheet Clarifications
The following typographic corrections and clarifications
are to be noted for the latest version of the Device Data
Sheet (DS39931D):
1. Module: Special Features (CONFIG2L)
The “T1DIG” feature mentioned in the Device
Data Sheet (DS39931D) is not implemented in
this device family. The feature, associated with
bit 3 of the CONFIG2L Configuration register, is
discussed in Section 26.1 “Configuration
Bits” and Section 2.5.1 “Oscillator Control
Register”.
For application firmware to switch to the Timer1
clock source, it must first enable the crystal
driver by setting the T1OSCEN bit (T1CON<3>).
The microcontroller will ignore attempts to clock
switch to the Timer1 clock source when the
crystal driver is disabled.
Note: Corrections are shown in bold. Where
possible, the original bold text formatting
has been removed for clarity.