Datasheet

PIC18F45J10 FAMILY

U-0 U-0 U-0 R/W-0 R/W-x R/W-0 R/S-0 U-0

— — — FREE WRERR WREN WR —

bit 7 bit 0

Legend: U = Unimplemented bit, read as ‘0’

R = Readable bit W = Writable bit S = Settable bit (cannot be cleared in software)

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 7-5 Unimplemented: Read as ‘0’

bit 4 FREE: Flash Row Erase Enable bit

1 = Performs an erase operation on the next WR command (cleared by completion of erase operation)

0 = Perform write only

bit 3 WRERR: Flash Program Error Flag bit

1 = A write operation is prematurely terminated (any Reset during self-timed programming in normal

operation, or an improper write attempt)

0 = The write operation completed

bit 2 WREN: Flash Program Write Enable bit

1 = Allows write cycles to Flash program

0 = Inhibits write cycles to Flash program

bit 1 WR: Write Control bit

1 = Initiates a program memory erase cycle or write cycle.

(The operation is self-timed and the bit is cleared by hardware once write is complete. The WR bit

can only be set (not cleared) in software.)

0 = Write cycle is complete

bit 0 Unimplemented: Read as ‘0’