Datasheet

© 2006 Microchip Technology Inc. DS41159E-page 337
PIC18FXX8
VOL Output Low Voltage
D080 I/O ports — 0.6 V I
OL = 8.5 mA, VDD = 4.2V,
-40°C to +85°C
D080A — 0.6 V I
OL = 7.0 mA, VDD = 4.2V,
-40°C to +125°C
D083 OSC2/CLKO
(RC mode)
—0.6VI
OL = 1.6 mA, VDD = 4.2V,
-40°C to +85°C
D083A — 0.6 V I
OL = 1.2 mA, VDD = 4.2V,
-40°C to +125°C
V
OH Output High Voltage
(3)
D090 I/O ports VDD – 0.7 — V IOH = -3.0 mA, VDD = 4.2V,
-40°C to +85°C
D090A V
DD – 0.7 — V IOH = -2.5 mA, VDD = 4.2V,
-40°C to +125°C
D092 OSC2/CLKO
(RC mode)
V
DD – 0.7 — V IOH = -1.3 mA, VDD = 4.2V,
-40°C to +85°C
D092A V
DD – 0.7 — V IOH = -1.0 mA, VDD = 4.2V,
-40°C to +125°C
D150 V
OD Open-Drain High Voltage — 7.5 V RA4 pin
Capacitive Loading Specs on
Output Pins
D101 C
IO All I/O pins and OSC2
(in RC mode)
— 50 pF To meet the AC Timing
Specifications
D102 C
B SCL, SDA — 400 pF In I
2
C™ mode
27.2 DC Characteristics: PIC18FXX8 (Industrial, Extended)
PIC18LFXX8 (Industrial) (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ T
A ≤ +125°C for extended
Param
No.
Symbol
Characteristic/
Device
Min Max Units Conditions
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PICmicro
®
device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR
pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.