Datasheet

 2010-2012 Microchip Technology Inc. DS41412F-page 441
PIC18(L)F2X/4XK22
27.8 DC Characteristics:Input/Output Characteristics, PIC18(L)F2X/4XK22
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A  +125°C
Param
No.
Symbol Characteristic Min Typ† Max Units Conditions
V
IL Input Low Voltage
I/O PORT:
D140
with TTL buffer — — 0.8 V 4.5V  V
DD  5.5V
D140A
— — 0.15 V
DD V1.8V  VDD  4.5V
D141
with Schmitt Trigger
buffer
——0.2V
DD V2.0V  VDD  5.5V
with I
2
C™ levels — — 0.3 VDD V
with SMBus levels — — 0.8 V 2.7V  V
DD  5.5V
D142
MCLR
, OSC1 (RC
mode)
(1)
——0.2VDD V
D142A
OSC1 (HS mode) — — 0.3 V
DD V
V
IH Input High Voltage
I/O ports: — —
D147
with TTL buffer 2.0 — — V 4.5V  V
DD 5.5V
D147A
0.25 V
DD +
0.8
——V1.8V  VDD  4.5V
D148
with Schmitt Trigger
buffer
0.8 V
DD ——V2.0V  VDD  5.5V
with I
2
C™ levels 0.7 VDD ——V
with SMBus levels 2.1 — — V 2.7V  V
DD  5.5V
D149
MCLR
0.8 VDD ——V
D150A
OSC1 (HS mode) 0.7 V
DD ——V
D150B
OSC1 (RC mode)
(1)
0.9 VDD ——V
IIL Input Leakage I/O and
MCLR
(2),(3)
V
SS VPIN VDD,
Pin at high-impedance
D155 I/O ports and MCLR
—
—
—
—
0.1
0.7
4
35
50
100
200
1000
nA
nA
nA
nA
+25°C
(4)
+60°C
+85°C
+125°C
I
PU Weak Pull-up Current
(4)
D158 IPURB PORTB weak pull-up
current
25
25
85
130
200
300
A
A
V
DD = 3.3V, VPIN = VSS
VDD = 5.0V, VPIN = VSS
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that
the PIC
®
device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR
pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Parameter is characterized but not tested.