Datasheet

 2010-2012 Microchip Technology Inc. DS41412F-page 439
PIC18(L)F2X/4XK22
.
27.7 DC Characteristics: Secondary Oscillator Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
Param
No.
Device Characteristics Typ Max Units Conditions
D130 Supply Current (I
DD)
(1),(2)
3.5 23 A -40°C VDD = 1.8V Fosc = 32 kHz
(SEC_RUN mode,
SOSC source)
3.7 25 A+25°C
3.8 — A+60°C
4.0 28 A+85°C
5.1 30 A +125°C
D131
6.2 26 A -40°C V
DD = 3.0V
6.4 30 A+25°C
6.5 — A+60°C
6.8 35 A+85°C
7.8 40 A +125°C
D132
15 35 A -40°C VDD = 2.3V Fosc = 32 kHz
(SEC_RUN mode,
SOSC source)
16 35 A +25°C
17 35 A +85°C
19 50 A +125°C
D133
18 50 A -40°C VDD = 3.0V
19 50 A +25°C
21 50 A +85°C
22 60 A +125°C
D134
19 55 A -40°C VDD = 5.0V
20 55 A +25°C
22 55 A +85°C
23 70 A +125°C
Note 1: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
Test condition: All Peripheral Module Control bits in PMD0, PMD1 and PMD2 set to ‘1’.
2: The test conditions for all I
DD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR
= VDD;
SOSCI / SOSCO = complementary external square wave, from rail-to-rail.