Datasheet

 2010-2012 Microchip Technology Inc. DS41412F-page 433
PIC18(L)F2X/4XK22
27.3 DC Characteristics: RC Run Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
Param
No.
Device Characteristics Typ Max Units Conditions
D020 Supply Current (IDD)
(1),(2)
3.6 23 A-40°C VDD = 1.8V FOSC = 31 kHz
(RC_RUN mode,
LFINTOSC
source)
3.9 25 A +25°C
3.9 — A +60°C
3.9 28 A +85°C
4.0 30 A 125°C
D021
8.1 26 A-40°C V
DD = 3.0V
8.4 30 A +25°C
8.6 — A +60°C
8.7 35 A +85°C
10.7 40 A +125°C
D022
16 35 A -40°C VDD = 2.3V FOSC = 31 kHz
(RC_RUN mode,
LFINTOSC
source)
17 35 A +25°C
18 35 A +85°C
19 50 A +125°C
D023
18 50 A -40°C VDD = 3.0V
20 50 A +25°C
21 50 A +85°C
22 60 A +125°C
D024
19 55 A -40°C VDD = 5.0V
21 55 A +25°C
22 55 A +85°C
23 70 A +125°C
D025
0.14 0.25 mA -40°C to +125°C V
DD = 1.8V FOSC = 500 kHz
(RC_RUN mode,
MFINTOSC
source)
D026
0.17 0.30 mA -40°C to +125°C V
DD = 3.0V
D027
0.18 0.25 mA -40°C to +125°C VDD = 2.3V FOSC = 500 kHz
(RC_RUN mode,
MFINTOSC
source)
D028
0.20 0.30 mA -40°C to +125°C VDD = 3.0V
D029
0.25 0.35 mA -40°C to +125°C VDD = 5.0V
Note 1: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
Test condition: All Peripheral Module Control bits in PMD0, PMD1 and PMD2 set to ‘1’.
2: The test conditions for all I
DD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR
= VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).