Datasheet

PIC18F2XK20/4XK20
DS41303G-page 292  2010 Microchip Technology Inc.
TABLE 21-1: REGISTERS ASSOCIATED WITH COMPARATOR VOLTAGE REFERENCE
REGISTER 21-2: CVRCON2: COMPARATOR VOLTAGE REFERENCE CONTROL 2 REGISTER
R/W-0 R-0 U-0 U-0 U-0 U-0 U-0 U-0
FVREN FVRST — — — — — —
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 7 FVREN: Fixed Voltage Reference Enable bit
1 = FVR circuit powered on
0 = FVR circuit not enabled by FVREN. Other peripherals may enable FVR.
bit 6 FVRST: Fixed Voltage Stable Status bit
1 = FVR is stable and can be used.
0 = FVR is not stable and should not be used.
bit 5-0 Unimplemented: Read as ‘0’.
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Reset
Values
on page
CVRCON CVREN CVROE CVRR CVRSS CVR3 CVR2 CVR1 CVR0 62
CVRCON2 FVREN FVRST — — — — — —61
CM1CON0
C1ON C1OUT C1OE C1POL C1SP C1R C1CH1 C1CH0 62
CM2CON0 C2ON C2OUT C2OE C2POL C2SP C2R C2CH1 C2CH0 62
CM2CON1 MC1OUT MC2OUT C1RSEL C2RSEL — — — —63
TRISA TRISA7
(1)
TRISA6
(1)
PORTA Data Direction Control Register 62
Legend: Shaded cells are not used with the comparator voltage reference.
Note 1: PORTA pins are enabled based on oscillator configuration.