Datasheet

© 2007 Microchip Technology Inc. DS39599G-page 327
PIC18F2220/2320/4220/4320
26.4.2 TIMING CONDITIONS
The temperature and voltages specified in Table 26-5
apply to all timing specifications unless otherwise
noted. Figure 26-5 specifies the load conditions for the
timing specifications.
TABLE 26-5: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
FIGURE 26-5: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Note: Because of space limitations, the generic
terms “PIC18FXX20” and “PIC18LFXX20”
are used throughout this section to refer
to the PIC18F2220/2320/4220/4320 and
PIC18LF2220/2320/4220/4320 families of
devices specifically and only those
devices.
AC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ T
A ≤ +125°C for extended
Operating voltage V
DD range as described in DC spec Section 26.1 and
Section 26.3.
LF parts operate up to industrial temperatures only.
VDD/2
CL
RL
Pin
Pin
VSS
VSS
CL
RL =464Ω
C
L = 50 pF for all pins except OSC2/CLKO
and including D and E outputs as ports
Load Condition 1
Load Condition 2