Datasheet

PIC18F2220/2320/4220/4320
DS39599G-page 112 © 2007 Microchip Technology Inc.
FIGURE 10-14: BLOCK DIAGRAM OF
MCLR
/VPP/RE3 PIN
MCLR/VPP/
Data Bus
RD PORTE
RD LATE
Schmitt
Trigger
MCLRE
RD TRISE
QD
EN
Latch
Filter
Low-Level
MCLR
Detect
High-Voltage Detect
Internal MCLR
HV
RE3
REGISTER 10-1: TRISE REGISTER
R-0 R-0 R/W-0 R/W-0 U-0 R/W-1 R/W-1 R/W-1
IBF OBF IBOV PSPMODE
— TRISE2 TRISE1 TRISE0
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 7 IBF: Input Buffer Full Status bit
1 = A word has been received and waiting to be read by the CPU
0 = No word has been received
bit 6 OBF: Output Buffer Full Status bit
1 = The output buffer still holds a previously written word
0 = The output buffer has been read
bit 5 IBOV: Input Buffer Overflow Detect bit (in Microprocessor mode)
1 = A write occurred when a previously input word has not been read (must be cleared in software)
0 = No overflow occurred
bit 4 PSPMODE: Parallel Slave Port Mode Select bit
1 = Parallel Slave Port mode
0 = General Purpose I/O mode
bit 3 Unimplemented: Read as ‘0’
bit 2 TRISE2: RE2 Direction Control bit
1 = Input
0 = Output
bit 1 TRISE1: RE1 Direction Control bit
1 = Input
0 = Output
bit 0 TRISE0: RE0 Direction Control bit
1 = Input
0 = Output