Datasheet

 2010 Microchip Technology Inc. Preliminary DS41350E-page 369
PIC18F/LF1XK50
27.2 DC Characteristics: PIC18F/LF1XK50-I/E (Industrial, Extended) (Continued)
PIC18LF1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
PIC18F1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Device
Characteristics
Min Typ† Max Units
Conditions
V
DD Note
Supply Current (I
DD)
(1, 2)
D016 — 2.6 3.3 mA 3.0 FOSC = 12 MHz
EC Oscillator (high power)
D016 — 2.6 3.3 mA 3.0 FOSC = 12 MHz
EC Oscillator (high power)
(5)
— 3.1 4.1 mA 5.0
D017 — 1.0 1.3 mA 3.0 F
OSC = 12 MHz
EC Oscillator (high power)
CPU Idle
D017 — 1.0 1.3 mA 3.0 FOSC = 12 MHz
EC Oscillator (high power)
CPU Idle
(5)
— 1.2 1.6 mA 5.0
D017A — 9 12 mA 3.0 F
OSC = 48 MHz
12 MHz EC Oscillator (high power)
PLL enabled
D017A — 8.9 12 mA 3.0 FOSC = 48 MHz
12 MHz EC Oscillator (high power)
PLL enabled
(5)
— 11 14 mA 5.0
D017B — 3.9 5.0 mA 3.0 F
OSC = 48 MHz
12 MHz EC Oscillator (high power)
PLL enabled, CPU Idle
D017B — 3.9 5.0 mA 3.0 FOSC = 48 MHz
12 MHz EC Oscillator (high power)
PLL enabled, CPU Idle
(5)
— 4.7 6.0 mA 5.0
D018 — 19 38 A1.8F
OSC = 32 kHz
LFINTOSC Oscillator mode
(3, 5)
—23 44A3.0
D018 — 21 40 A 1.8 FOSC = 32 kHz
LFINTOSC Oscillator mode
(3, 5)
— 25 46 A 3.0
— 26 48 A 5.0
D019 — 16 33 A1.8F
OSC = 32 kHz
LFINTOSC Oscillator
CPU Idle
—18 38A3.0
D019 — 18 35 A 1.8 FOSC = 32 kHz
LFINTOSC Oscillator
CPU Idle
(5)
— 20 40 A 3.0
— 21 42 A 5.0
Supply Current (I
DD)
(1, 2)
* These parameters are characterized but not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.
5: 330 nF capacitor on V
USB pin.