Datasheet

PIC18(L)F1XK22
DS41365E-page 338  2009-2011 Microchip Technology Inc.
25.7 DC Characteristics: Secondary Idle Supply Current, PIC18(L)F1XK22-I/E
(Industrial, Extended)
PIC18LF1XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
PIC18F1XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Device Characteristics Typ. Max. Units Conditions
D023
Supply Current (I
DD)
(1, 2, 4)
25A-40°C
V
DD = 1.8V
F
OSC = 32 kHz
(3)
(SEC_IDLE mode,
Timer1 as clock)
25A+25°C
39A+85°C
811A +125°C
D023A 4 8 A-40°C
V
DD = 3.0V
510A+25°C
920A+85°C
20 23 A +125°C
D023 20 40 A -40°C
VDD = 2.3V
FOSC = 32 kHz
(3)
(SEC_IDLE mode,
Timer1 as clock)
21 41 A +25°C
23 44 A +85°C
24 47 A +125°C
D023A 23 45 A -40°C
VDD = 3.0V
25 47 A +25°C
28 49 A +85°C
30 52 A +125°C
D023B 28 50 A -40°C
VDD = 5.0V
30 54 A +25°C
32 59 A +85°C
33 62 A +125°C
* These parameters are characterized but not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be
extended by the formula I
R = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.