Datasheet
2009-2011 Microchip Technology Inc. DS41365E-page 337
PIC18(L)F1XK22
25.6 DC Characteristics: Secondary Run Supply Current, PIC18(L)F1XK22-I/E
(Industrial, Extended)
PIC18LF1XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial
-40°C T
A +125°C for extended
PIC18F1XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
-40°C T
A +125°C for extended
Param
No.
Device Characteristics Typ. Max. Units Conditions
D022
Supply Current (IDD)
(1, 2, 4)
69A-40°C
V
DD = 1.8V
F
OSC = 32 kHz
(3)
(SEC_RUN mode,
Timer1 as clock)
610A+25°C
714A+85°C
11 17 A +125°C
D022A 11 15 A-40°C
V
DD = 3.0V
11 16 A+25°C
12 25 A+85°C
26 28 A +125°C
D022 22 65 A -40°C
VDD = 2.3V
FOSC = 32 kHz
(3)
(SEC_RUN mode,
Timer1 as clock)
23 67 A +25°C
25 69 A +85°C
28 75 A +125°C
D022A 25 70 A -40°C
VDD = 3.0V
27 72 A +25°C
30 74 A +85°C
32 77 A +125°C
D022B 30 75 A -40°C
VDD = 5.0V
32 77 A +25°C
34 79 A +85°C
35 83 A +125°C
* These parameters are characterized but not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be
extended by the formula I
R = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.