Datasheet

 2009-2011 Microchip Technology Inc. DS41365E-page 327
PIC18(L)F1XK22
25.0 ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings
(†)
Ambient temperature under bias....................................................................................................... -40°C to +125°C
Storage temperature ........................................................................................................................ -65°C to +150°C
Voltage on V
DD with respect to VSS, PIC18F1XK22 ........................................................................... -0.3V to +6.0V
Voltage on V
DD with respect to VSS, PIC18LF1XK22 ......................................................................... -0.3V to +4.0V
Voltage on MCLR
with respect to Vss ................................................................................................-0.3V to +11.0V
Voltage on all other pins with respect to V
SS ........................................................................... -0.3V to (VDD + 0.3V)
Total power dissipation
(1)
................................................................................................................................... 1.0 W
Maximum current out of V
SS pin .................................................................................................................... 300 mA
Maximum current into V
DD pin ....................................................................................................................... 200 mA
Clamp current, I
K (VPIN < 0 or VPIN > VDD)20 mA
Maximum output current sunk by any I/O pin.................................................................................................... 25 mA
Maximum output current sourced by any I/O pin .............................................................................................. 25 mA
Maximum current sunk by all ports ................................................................................................................. 200 mA
Maximum current sourced by all ports ............................................................................................................. 70 mA
Note 1: Power dissipation is calculated as follows: P
DIS = VDD x {IDD –  IOH} +  {(VDD – VOH) x IOH} + (VOl x IOL).
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for
extended periods may affect device reliability.