Datasheet

 2010 Microchip Technology Inc. Preliminary DS41350E-page 373
PIC18F/LF1XK50
Power-down Module Current
D032 — — 1.8 8 A 1.8 A/D Current
(1, 4)
, no conversion in
progress
—— 3 10A3.0
D032 — — 6 12 A 1.8 A/D Current
(1, 4)
, no conversion in
progress
— — 10 17 A 3.0
— — 11.5 22 A 5.0
D033 — — 38 44 A 1.8 Comparator Current, low power
— — 40 47 A3.0
D033 — 30 40 49 A 2.0 Comparator Current, low power
— 34 44 53 A 3.0
— 36 50 60 A 5.0
D033A — — 239 244 A 1.8 Comparator Current, high power
— — 242 249 A3.0
D033A — 144 243 250 A 2.0 Comparator Current, high power
— 146 247 256 A 3.0
— 151 253 264 A 5.0
D034 — — 18 23 A 1.8 Voltage Reference Current
— — 30 35 A3.0
D034 — 35 36 44 A 2.0 Voltage Reference Current
— 43 44 60 A 3.0
— 55 65 74 A 5.0
27.3 DC Characteristics: PIC18F/LF1XK50-I/E (Power-Down) (Continued)
PIC18LF1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
PIC18F1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Device Characteristics Min Typ†
Max
+85°C
Max
+125°C
Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral current is the sum of the base I
DD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base I
DD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: Fixed Voltage Reference is automatically enabled whenever the BOR is enabled
4: A/D oscillator source is F
RC
5: 330 f capacitor on VUSB pin.