Datasheet
2010 Microchip Technology Inc. Preliminary DS41350E-page 371
PIC18F/LF1XK50
D024 — 0.5 0.7 mA 1.8 FOSC = 4 MHz
EXTRC Oscillator mode
—0.91.1mA3.0
D024 — 0.5 0.7 mA 1.8 FOSC = 4 MHz
EXTRC Oscillator mode
(5)
— 0.9 1.1 mA 3.0
— 1.0 1.4 mA 5.0
D025 — 1.0 1.5 mA 1.8 F
OSC = 6 MHz
HS Oscillator
—1.72.1mA3.0
D025 — 1.0 1.5 mA 1.8 FOSC = 6 MHz
HS Oscillator
(5)
— 1.7 2.1 mA 3.0
— 2.1 2.5 mA 5.0
D025A — 5.4 6.0 mA 3.0 F
OSC = 24 MHz
6 MHz HS Oscillator
PLL enabled
D025A — 5.4 6.0 mA 3.0 FOSC = 24 MHz
6 MHz HS Oscillator
PLL enabled
(5)
— 7.4 7.6 mA 5.0
D026 — 3.2 3.3 mA 3.0 F
OSC = 12 MHz
HS Oscillator
D026 — 3.2 3.3 mA 3.0 FOSC = 12 MHz
HS Oscillator
(5)
— 4.8 4.2 mA 5.0
D026A — 10 12 mA 3.0 F
OSC = 48 MHz,
12 MHz HS Oscillator
PLL enabled
D026A — 10 12 mA 3.0 FOSC = 48 MHz,
12 MHz HS Oscillator
PLL enabled
(5)
— 13 15 mA 5.0
27.2 DC Characteristics: PIC18F/LF1XK50-I/E (Industrial, Extended) (Continued)
PIC18LF1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial
-40°C T
A +125°C for extended
PIC18F1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
-40°C T
A +125°C for extended
Param
No.
Device
Characteristics
Min Typ† Max Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.
5: 330 nF capacitor on V
USB pin.