Datasheet

PIC18F/LF1XK50
DS41350E-page 370 Preliminary  2010 Microchip Technology Inc.
D020 — 320 470 A1.8F
OSC = 500 kHz
LFINTOSC Oscillator
— 460 670 A3.0
D020 — 350 500 A 1.8 FOSC = 500 kHz
LFINTOSC Oscillator
(5)
— 490 700 A 3.0
— 540 780 A 5.0
D021 — 380 600 A1.8F
OSC = 1 MHz
HFINTOSC Oscillator
— 550 870 A3.0
D021 — 410 600 A 1.8 FOSC = 1 MHz
HFINTOSC Oscillator
(5)
— 580 870 A 3.0
— 650 970 A 5.0
D021A — 290 600 A1.8F
OSC = 1 MHz
HFINTOSC Oscillator
CPU Idle
— 410 760 A3.0
D021A — 320 620 A 1.8 FOSC = 1 MHz
HFINTOSC Oscillator
CPU Idle
(5)
— 440 770 A 3.0
— 490 880 A 5.0
D022 — 1.2 1.6 mA 1.8 F
OSC = 8 MHz
HFINTOSC Oscillator
—2.12.9mA3.0
D022 — 1.2 1.6 mA 1.8 FOSC = 8 MHz
HFINTOSC Oscillator
(5)
— 2.1 2.9 mA 3.0
— 2.4 3.5 mA 5.0
D023 — 2.0 2.7 mA 1.8 F
OSC = 16 MHz
HFINTOSC Oscillator
—3.54.8mA3.0
D023 — 2.0 2.7 mA 1.8 FOSC = 16 MHz
HFINTOSC Oscillator
(5)
— 3.5 4.8 mA 3.0
— 4.0 6.0 mA 5.0
D023A — 0.9 1.3 mA 1.8 F
OSC = 16 MHz
HFINTOSC Oscillator
CPU Idle
—1.52.1mA3.0
D023A — 0.9 1.3 mA 1.8 FOSC = 16 MHz
HFINTOSC Oscillator
CPU Idle
(5)
— 1.5 2.1 mA 3.0
— 1.7 2.6 mA 5.0
Supply Current (I
DD)
(1, 2)
27.2 DC Characteristics: PIC18F/LF1XK50-I/E (Industrial, Extended) (Continued)
PIC18LF1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
PIC18F1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Device
Characteristics
Min Typ† Max Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.
5: 330 nF capacitor on V
USB pin.