Datasheet
2010 Microchip Technology Inc. Preliminary DS41350E-page 367
PIC18F/LF1XK50
Supply Current (IDD)
(1, 2)
D012 — 300 700 A1.8FOSC = 4 MHz
XT Oscillator
— 500 1200 A3.0
D012 — 330 700 A 1.8 FOSC = 4 MHz
XT Oscillator
— 530 1200 A 3.0
— 730 1400 A 5.0
D012A — 240 300 A1.8F
OSC = 4 MHz,
XT Oscillator
CPU Idle
— 440 550 A3.0
D012A — 230 300 A 1.8 FOSC = 4 MHz
XT Oscillator
CPU Idle
— 400 550 A 3.0
— 470 640 A 5.0
D013 — 140 180 A1.8F
OSC = 1 MHz
EC Oscillator (medium power)
— 230 300 A3.0
D013 — 160 210 A 1.8 FOSC = 1 MHz
EC Oscillator (medium power)
(5)
— 250 310 A 3.0
— 290 380 A 5.0
D013A — 50 64 A1.8F
OSC = 1 MHz
EC Oscillator (medium power)
CPU Idle
—86110A3.0
D013A — 70 100 A 1.8 FOSC = 1 MHz
EC Oscillator (medium power)
CPU Idle
(5)
— 100 150 A 3.0
— 120 170 A 5.0
D014 — 500 640 A1.8F
OSC = 4 MHz
EC Oscillator (medium power)
— 830 1100 A3.0
D014 — 520 770 A 1.8 FOSC = 4 MHz
EC Oscillator (medium power)
(5)
— 860 1200 A 3.0
— 1000 1370 A 5.0
27.2 DC Characteristics: PIC18F/LF1XK50-I/E (Industrial, Extended) (Continued)
PIC18LF1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial
-40°C T
A +125°C for extended
PIC18F1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
-40°C T
A +125°C for extended
Param
No.
Device
Characteristics
Min Typ† Max Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.
5: 330 nF capacitor on V
USB pin.