Datasheet

PIC18F/LF1XK50
DS41350E-page 366 Preliminary  2010 Microchip Technology Inc.
27.2 DC Characteristics: PIC18F/LF1XK50-I/E (Industrial, Extended)
PIC18LF1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
PIC18F1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Device
Characteristics
Min Typ† Max Units
Conditions
V
DD Note
Supply Current (I
DD)
(1, 2)
D009
LDO Regulator — 30 — A —
— 5 — A — LP Clock mode and Sleep (requires FVR and
BOR to be disabled)
D010 — 6.0 9 A1.8F
OSC = 32 kHz
LP Oscillator
(4)
,
-40°C  T
A  +85°C
—712A3.0
D010 — 6 11 A 1.8 FOSC = 32 kHz
LP Oscillator
(4)
,
-40°C  T
A  +85°C
— 7 17 A 3.0
— 12 20 A 5.0
D011* — 6.0 12 A1.8
F
OSC = 32 kHz
LP Oscillator
-40°C  T
A  +125°C
—9.016 A3.0
D011* — 8.0 15 A 1.8
FOSC = 32 kHz
LP Oscillator
(4)
-40°C  TA  +125°C
— 11 25 A 3.0
— 12 35 A 5.0
D011* — 170 220 A1.8F
OSC = 1 MHz
XT Oscillator
— 280 370 A3.0
D011* — 200 250 A 1.8 FOSC = 1 MHz
XT Oscillator
— 310 400 A 3.0
— 380 490 A 5.0
D011* — 75 110 A1.8F
OSC = 1 MHz
XT Oscillator
CPU Idle
— 130 190 A3.0
D011* — 90 130 A 1.8 FOSC = 1 MHz
XT Oscillator
CPU Idle
— 140 210 A 3.0
— 160 250 A 5.0
* These parameters are characterized but not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.
5: 330 nF capacitor on V
USB pin.