Datasheet

 2010 Microchip Technology Inc. Preliminary DS41350E-page 131

PIC18F/LF1XK50

14.4.5 AUTO-RESTART MODE

The Enhanced PWM can be configured to automati-

cally restart the PWM signal once the auto-shutdown

condition has been removed. Auto-restart is enabled by

setting the PRSEN bit in the PWM1CON register.

If auto-restart is enabled, the ECCPASE bit will remain

set as long as the auto-shutdown condition is active.

When the auto-shutdown condition is removed, the

ECCPASE bit will be cleared via hardware and normal

operation will resume.

FIGURE 14-13: PWM AUTO-SHUTDOWN WITH AUTO-RESTART ENABLED (PRSEN = 1)

Shutdown

PWM

ECCPASE bit

Activity

Event

Shutdown

Event Occurs

Shutdown

Event Clears

PWM

Resumes

Normal PWM

Start of

PWM Period