Datasheet

© 2007 Microchip Technology Inc. DS39605F-page 35
PIC18F1220/1320
TABLE 4-1: TIME-OUT IN VARIOUS SITUATIONS
REGISTER 4-1: RCON REGISTER BITS AND POSITIONS
TABLE 4-2: STATUS BITS, THEIR SIGNIFICANCE AND THE INITIALIZATION CONDITION FOR
RCON REGISTER
Oscillator
Configuration
Power-up
(2)
and Brown-out
Exit from
Low-Power Mode
PWRTEN = 0 PWRTEN = 1
HSPLL 66 ms
(1)
+ 1024 TOSC + 2 ms
(2)
1024 TOSC + 2 ms
(2)
1024 TOSC + 2 ms
(2)
HS, XT, LP 66 ms
(1)
+ 1024 TOSC 1024 TOSC 1024 TOSC
EC, ECIO 66 ms
(1)
5-10 μs
(3)
5-10 μs
(3)
RC, RCIO 66 ms
(1)
5-10 μs
(3)
5-10 μs
(3)
INTIO1, INTIO2 66 ms
(1)
5-10 μs
(3)
5-10 μs
(3)
Note 1: 66 ms (65.5 ms) is the nominal Power-up Timer (PWRT) delay.
2: 2 ms is the nominal time required for the 4x PLL to lock.
3: The program memory bias start-up time is always invoked on POR, wake-up from Sleep, or on any exit
from power managed mode that disables the CPU and instruction execution.
R/W-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
IPEN
— —RITO PD POR BOR
bit 7 bit 0
Note: Refer to Section 5.14 “RCON Register” for bit definitions.
Condition
Program
Counter
RCON
Register
RI
TO PD POR BOR STKFUL STKUNF
Power-on Reset 0000h 0--1 1100 1 1 1 0 0 0 0
RESET Instruction 0000h 0--0 uuuu 0 u u u u u u
Brown-out 0000h 0--1 11u- 1 1 1 u 0 u u
MCLR
during Power Managed
Run modes
0000h 0--u 1uuu u 1 u u u u u
MCLR during Power Managed
Idle modes and Sleep
0000h 0--u 10uu u 1 0 u u u u
WDT Time-out during Full
Power or Power Managed Run
0000h 0--u 0uuu u 0 u u u u u
MCLR
during Full Power
Execution
0000h 0--u uuuu u u u u u
uu
Stack Full Reset (STVR = 1) 1u
Stack Underflow Reset
(STVR = 1)
u1
Stack Underflow Error (not an
actual Reset, STVR = 0)
0000h u--u uuuu u u u u u u 1
WDT Time-out during Power
Managed Idle or Sleep
PC + 2 u--u 00uu u 0 0 u u u u
Interrupt Exit from Power
Managed modes
PC + 2 u--u u0uu u u 0 u u u u
Legend: u = unchanged, x = unknown, – = unimplemented bit, read as ‘0’
Note 1: When the wake-up is due to an interrupt and the GIEH or GIEL bits are set, the PC is loaded with the
interrupt vector (0x000008h or 0x000018h).