Datasheet

PIC18F1220/1320
DS39605F-page 258 © 2007 Microchip Technology Inc.
TABLE 22-5: PLL CLOCK TIMING SPECIFICATIONS, HS/HSPLL MODE (VDD = 4.2V TO 5.5V)
Param
No.
Sym Characteristic Min Typ† Max Units Conditions
F10 F
OSC Oscillator Frequency Range 4 — 10 MHz HS and HSPLL mode only
F11 FSYS On-Chip VCO System Frequency 16 — 40 MHz HSPLL mode only
F12 T
PLL PLL Start-up Time (Lock Time) — — 2 ms HSPLL mode only
F13 ΔCLK CLKO Stability (Jitter) -2 — +2 % HSPLL mode only
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
TABLE 22-6: INTERNAL RC ACCURACY: PIC18F1220/1320 (INDUSTRIAL)
PIC18LF1220/1320 (INDUSTRIAL)
PIC18LF1220/1320
(Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for industrial
PIC18F1220/1320
(Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for industrial
-40°C ≤ T
A ≤ +125°C for extended
Param
No.
Device Min Typ Max Units Conditions
INTOSC Accuracy @ Freq = 8 MHz, 4 MHz, 2 MHz, 1 MHz, 500 kHz, 250 kHz, 125 kHz
(1)
PIC18LF1220/1320 -2 +/-1 2 % +25°C VDD = 2.7-3.3V
-5 — 5 % -10°C to +85°C V
DD = 2.7-3.3V
-10 — 10 % -40°C to +85°C V
DD = 2.7-3.3V
PIC18F1220/1320PIC18F
1220/1320
-2 +/-1 2 % +25°C VDD = 4.5-5.5V
-5 — 5 % -10°C to +85°C VDD = 4.5-5.5V
-10 — 10 % -40°C to +85°C VDD = 4.5-5.5V
INTRC Accuracy @ Freq = 31 kHz
(2)
PIC18LF1220/1320 26.562 — 35.938 kHz -40°C to +85°C VDD = 2.7-3.3V
PIC18F1220/1320PIC18F
1220/1320
26.562 — 35.938 kHz -40°C to +85°C VDD = 4.5-5.5V
Legend: Shading of rows is to assist in readability of the table.
Note 1: Frequency calibrated at 25°C. OSCTUNE register can be used to compensate for temperature and V
DD drift.
2: INTRC frequency after calibration.
3: Change of INTRC frequency as V
DD changes.