Datasheet

 1999-2013 Microchip Technology Inc. DS39026D-page 301
PIC18CXX2
PIC18CXX2 PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
Sales and Support
PART NO.

X /XX XXX
PatternPackageTemperature
Range
Device
Device PIC18CXX2
(1)
, PIC18CXX2T
(2)
;
VDD range 4.2V to 5.5V
PIC18LCXX2
(1)
, PIC18LCXX2T
(2)
;
VDD range 2.5V to 5.5V
Temperature
Range
I= -40C to +85C (Industrial)
E= -40C to +125C (Extended)
Package JW = Windowed CERDIP
(3)
PT = TQFP (Thin Quad Flatpack)
SO = SOIC
SP = Skinny plastic dip
P=PDIP
L=PLCC
Pattern QTP, SQTP, Code or Special Requirements
(blank otherwise)
Examples:
a) PIC18LC452 - I/P 301 = Industrial temp.,
PDIP package, 4 MHz, Extended V
DD
limits, QTP pattern #301.
b) PIC18LC242 - I/SO = Industrial temp.,
SOIC package, Extended V
DD limits.
c) PIC18C442 - E/P = Extended temp.,
PDIP package, 40MHz, normal V
DD
limits.
Note 1: C = Standard Voltage range
LC = Wide Voltage Range
2: T = in tape and reel - SOIC,
PLCC, and TQFP
packages only.
3: JW Devices are UV erasable and can
be programmed to any device configu-
ration. JW Devices meet the electrical
requirement of each oscillator type
(including LC devices).
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Worldwide Site (www.microchip.com)