Datasheet

PIC18CXX2
DS39026D-page 82  1999-2013 Microchip Technology Inc.
TABLE 8-3: PORTB FUNCTIONS
TABLE 8-4: SUMMARY OF REGISTERS ASSOCIATED WITH PORTB
Name Bit# Buffer Function
RB0/INT0 bit0 TTL/ST
(1)
Input/output pin or external interrupt input1. Internal software
programmable weak pull-up.
RB1/INT1 bit1 TTL/ST
(1)
Input/output pin or external interrupt input2. Internal software
programmable weak pull-up.
RB2/INT2 bit2 TTL/ST
(1)
Input/output pin or external interrupt input3. Internal software
programmable weak pull-up.
RB3/CCP2
(3)
bit3 TTL/ST
(4)
Input/output pin. Capture2 input/Compare2 output/PWM output when
CCP2MX configuration bit is enabled. Internal software
programmable weak pull-up.
RB4 bit4 TTL Input/output pin (with interrupt-on-change). Internal software
programmable weak pull-up.
RB5 bit5 TTL Input/output pin (with interrupt-on-change). Internal software
programmable weak pull-up.
RB6 bit6 TTL/ST
(2)
Input/output pin (with interrupt-on-change). Internal software
programmable weak pull-up. Serial programming clock.
RB7 bit7 TTL/ST
(2)
Input/output pin (with interrupt-on-change). Internal software
programmable weak pull-up. Serial programming data.
Legend: TTL = TTL input, ST = Schmitt Trigger input
Note 1: This buffer is a Schmitt Trigger input when configured as the external interrupt.
2: This buffer is a Schmitt Trigger input when used in Serial Programming mode.
3: A device configuration bit selects which I/O pin the CCP2 pin is multiplexed on.
4: This buffer is a Schmitt Trigger input when configured as the CCP2 input.
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Value on
POR,
BOR
Value on all
other
RESETS
PORTB RB7 RB6 RB5 RB4 RB3 RB2 RB1 RB0 xxxx xxxx uuuu uuuu
LATB LATB Data Output Register
TRISB PORTB Data Direction Register 1111 1111 1111 1111
INTCON
GIE/
GIEH
PEIE/
GIEL
TMR0IE INT0IE RBIE TMR0IF INT0IF RBIF 0000 000x 0000 000u
INTCON2 RBPU INTEDG0 INTEDG1 INTEDG2 —
TMR0IP — RBIP 1111 -1-1 1111 -1-1
INTCON3 INT2IP INT1IP — INT2IE INT1IE — INT2IF INT1IF 11-0 0-00 11-0 0-00
Legend: x = unknown, u = unchanged. Shaded cells are not used by PORTB.