Datasheet

 1998-2013 Microchip Technology Inc. DS30289C-page 65
PIC17C7XX
8.4 Operation with External Memory
Interface
When the table reads/writes are accessing external
memory (via the external system interface bus), the
table latch for the table reads is different from the table
latch for the table writes (see Figure 8-9).
This means that you cannot do a TABLRD instruction,
and use the values that were loaded into the table
latches for a TABLWT instruction. Any table write
sequence should use both the TLWT and then the
TABLWT instructions.
FIGURE 8-9: ACCESSING EXTERNAL MEMORY WITH TABLRD AND TABLWT INSTRUCTIONS
TABLPTR
TABLATH (for Table Reads)
TABLATH (for Table Writes)
Program Memory
TABLRD
TABLWT
(In External Memory Space)