Datasheet

 1996 Microchip Technology Inc. DS30412C-page 237
PIC17C4X
PIC17C4X
Product Identification System
To order or to obtain information, e.g., on pricing or delivery, please use the listed part numbers, and refer to the factory or the listed
sales offices.
Sales and Support
Products supported by a preliminary Data Sheet may possibly have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1.Your local Microchip sales office (see below)
2.The Microchip Corporate Literature Center U.S. FAX: [phone]
3.The Microchip’s Bulletin Board, via your local CompuServe number (CompuServe membership NOT required).
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
For latest version information and upgrade kits for Microchip Development Tools, please call 1-800-755-2345 or 1-602-786-7302.
Pattern: QTP, SQTP, ROM Code (factory specified) or
Special Requirements. Blank for OTP and
Windowed devices
Package: P = PDIP
JW = Windowed CERDIP
P = PDIP (600 mil)
PQ = MQFP
PT = TQFP
L = PLCC
Temperature – = 0˚C to +70˚C
Range: I = –40˚C to +85˚C
Frequency 08 = 8 MHz
Range: 16 = 16 MHz
25 = 25 Mhz
33 = 33 Mhz
Device: PIC17C44 : Standard Vdd range
PIC17C44T : (Tape and Reel)
PIC17LC44 : Extended Vdd range
PART NO. – XX X /XX XXX
Examples
a) PIC17C42 – 16/P
Commercial Temp.,
PDIP package,
16 MHZ,
normal
VDD limits
b) PIC17LC44 – 08/PT
Commercial Temp.,
TQFP package,
8MHz,
extended
VDD limits
c) PIC17C43 – 25I/P
Industrial Temp.,
PDIP package,
25 MHz,
normal
VDD limits
This document was created with FrameMaker404