Datasheet

PIC16(L)F720/721
DS40001430E-page 202  2010-2013 Microchip Technology Inc.
TABLE 23-6: CAPTURE/COMPARE/PWM REQUIREMENTS (CCP)
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C  T
A  +125°C
Param.
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
CC01* TccL CCP Input Low Time No Prescaler 0.5T
CY + 20 — — ns
With Prescaler 20 — — ns
CC02* TccH CCP Input High Time No Prescaler 0.5T
CY + 20 — — ns
With Prescaler 20 — — ns
CC03* TccP CCP Input Period 3T
CY + 40
N
— — ns N = prescale value (1, 4 or 16)
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
TABLE 23-7: PIC16F720/721 A/D CONVERTER (ADC) CHARACTERISTICS
Operating Conditions (unless otherwise stated)
V
DD = 3.0V, TA 25°C
Param.
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
AD01 N
R Resolution — — 8 bit
AD02 E
IL Integral Error — — ±1.7 LSb VDD = 3.0V
AD03 E
DL Differential Error — — ±1 LSb No missing codes
V
DD = 3.0V
AD04 E
OFF Offset Error — — ±2.2 LSb VDD = 3.0V
AD07 E
GN Gain Error — — ±1.5 LSb VDD = 3.0V
AD07 V
AIN Full-Scale Range VSS —VDD V
AD08* Z
AIN Recommended Impedance of
Analog Voltage Source
—— 10k
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.