Datasheet

PIC16LF1904/6/7
DS41569A-page 242 Preliminary  2011 Microchip Technology Inc.
22.4 DC Characteristics: PIC16LF1904/6/7-I/E
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
VIL Input Low Voltage
I/O PORT:
D032 with TTL buffer — — 0.15 V
DD V1.8V  VDD  3.6V
D033 with Schmitt Trigger buffer — — 0.2 V
DD V1.8V  VDD  3.6V
D034 MCLR
, OSC1 — — 0.2 VDD V
V
IH Input High Voltage
I/O ports:
D040 with TTL buffer 0.25 V
DD +
0.8
——V1.8V  VDD  3.6V
D041 with Schmitt Trigger buffer 0.8 V
DD ——V1.8V  VDD  3.6V
D042 MCLR
0.8 VDD ——V
I
IL Input Leakage Current
(2)
D060 I/O ports — ± 5
± 5
± 125
± 1000
nA
nA
VSS  VPIN  VDD, Pin at high-
impedance @ 85°C
125°C
D061 MCLR
(3)
—± 50± 200nAVSS  VPIN  VDD @ 85°C
I
PUR Weak Pull-up Current
D070* 25 100 200 AVDD = 3.3V, VPIN = VSS
VOL Output Low Voltage
D080 I/O ports
—
—0.6V
IOL = 6mA, VDD = 3.3V
I
OL = 1.8mA, VDD = 1.8V
V
OH Output High Voltage
D090 I/O ports
V
DD - 0.7 — — V
I
OH = 3mA, VDD = 3.3V
I
OH = 1mA, VDD = 1.8V
Capacitive Loading Specs on Output Pins
D101* CIO All I/O pins — — 50 pF
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: Negative current is defined as current sourced by the pin.