Datasheet

 2011 Microchip Technology Inc. Preliminary DS41569A-page 241
PIC16LF1904/6/7
22.3 DC Characteristics: PIC16LF1904/6/7-I/E (Power-Down)
PIC16LF1904/6/7
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Device Characteristics Min. Typ†
Max.
+85°C
Max.
+125°C
Units
Conditions
V
DD Note
Power-down Base Current (I
PD)
(2)
D023 — 0.03 1.0 3.0 A 1.8 WDT, BOR, FVR, and T1OSC
disabled, all Peripherals Inactive
— 0.04 2.0 4.0
A3.0
— 0.09 3.0 5.0
A3.6
D024 — 0.3 2.0 4.0
A 1.8 LPWDT Current (Note 1)
— 0.5 3.0 5.0 A3.0
— 0.6 4.0 6.0
A3.6
D025
—20 31 35
A 1.8 FVR current
—22 41 45
A3.0
—24 46 50
A3.6
D026
— 121 300 560 nA 3.0 LPBOR current
(Note 1)
— 141 400 700 nA 3.6
D027 — 7.5 16 32
A 3.0 BOR Current (Note 1)
— 8.0 18 34 A3.6
D028 — 0.5 2.0 4.0
A 1.8 T1OSC Current (Note 1)
— 0.6 3.0 5.0 A3.0
— 0.7 4.0 6.0
A3.6
D029 — 0.4 2.0 4.0
A 1.8 A/D Current (Note 1, Note 3), no
conversion in progress
— 0.7 3.0 5.0
A3.0
— 0.9 4.0 6.0
A3.6
D030 — — 250 —
A 1.8 A/D Current (Note 1, Note 3),
conversion in progress
— — 250 —
A3.0
— — 250 —
A3.6
D031 LCD Bias Ladder
Low power — 1 5 6
A3.6
Medium Power — 10 16 21
A3.6
High Power — 100 110 120
A3.6
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Legend: TBD = To Be Determined
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral
 current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: A/D oscillator source is FRC.