Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller UQFN 28 (4x4) 8-Bit 20 MHz I/O number 25

151

152

153

154

155

156

157

158

159

160

Table Of Contents

TABLE 1: 28/40/44-Pin Allocation Table (PIC16LF1904/6/7)
1.0 Device Overview
- TABLE 1-1: Device Peripheral Summary
- FIGURE 1-1: PIC16LF1904/6/7 Block Diagram
- TABLE 1-2: PIC16LF1904/6/7 Pinout Description
2.0 Enhanced Mid-range CPU
- FIGURE 2-1: Core Block Diagram
3.0 Memory Organization
- TABLE 3-1: Device Sizes and Addresses
- FIGURE 3-1: Program Memory Map And Stack For PIC16LF1904
- FIGURE 3-2: Program Memory Map And Stack For PIC16LF1906/7
- TABLE 3-2: Core Registers
- Register 3-1: STATUS: STATUS Register
- FIGURE 3-3: Banked Memory Partitioning
- TABLE 3-3: PIC16LF1904/6/7 Memory Map
- TABLE 3-3: PIC16LF1904/6/7 Memory Map (Continued)
- TABLE 3-3: PIC16LF1904/6/7 Memory Map (Continued)
- TABLE 3-4: Core Function Registers Summary
- TABLE 3-5: Special Function Register Summary
- FIGURE 3-4: Loading Of PC In Different Situations
- FIGURE 3-5: Accessing the Stack Example 1
- FIGURE 3-6: Accessing the Stack Example 2
- FIGURE 3-7: Accessing the Stack Example 3
- FIGURE 3-8: Accessing the Stack Example 4
- FIGURE 3-9: Indirect Addressing
- FIGURE 3-10: Traditional Data Memory Map
- FIGURE 3-11: Linear Data Memory Map
- FIGURE 3-12: Program Flash Memory Map
4.0 Device Configuration
- Register 4-1: Configuration Word 1
- Register 4-2: Configuration Word 2
- Register 4-3: DEVICEID: Device ID Register
5.0 Resets
- FIGURE 5-1: Simplified Block Diagram Of On-Chip Reset Circuit
- TABLE 5-1: BOR Operating Modes
- FIGURE 5-2: Brown-Out Situations
- Register 5-1: BORCON: Brown-out Reset Control Register
- TABLE 5-2: MCLR Configuration
- FIGURE 5-3: Reset Start-Up Sequence
- TABLE 5-3: Reset Status Bits and Their Significance
- TABLE 5-4: Reset Condition for Special Registers(2)
- Register 5-2: PCON: Power Control Register
- TABLE 5-5: Summary Of Registers Associated With Resets
6.0 Oscillator Module
- FIGURE 6-1: Simplified PIC® MCU Clock Source Block Diagram
- FIGURE 6-2: External Clock (EC) Mode Operation
- FIGURE 6-3: Quartz Crystal Operation (Secondary Oscillator)
- FIGURE 6-4: Internal Oscillator Switch Timing
- Register 6-1: OSCCON: Oscillator Control Register
- Register 6-2: OSCSTAT: Oscillator Status ReGister
- TABLE 6-1: Summary of Registers Associated with Clock Sources
- TABLE 6-2: Summary of cONFIGURATION wORD with Clock Sources
7.0 Interrupts
- FIGURE 7-1: Interrupt Logic
- FIGURE 7-2: Interrupt Latency
- FIGURE 7-3: INT Pin Interrupt Timing
- Register 7-1: INTCON: Interrupt Control Register
- Register 7-2: PIE1: Peripheral Interrupt Enable Register 1
- Register 7-3: PIE2: Peripheral Interrupt Enable Register 2
- Register 7-4: PIR1: Peripheral Interrupt Request Register 1
- Register 7-5: PIR2: Peripheral Interrupt Request Register 2
- TABLE 7-1: Summary of Registers Associated with Interrupts
8.0 Power-Down Mode (Sleep)
- FIGURE 8-1: Wake-Up From Sleep Through Interrupt
- TABLE 8-1: Summary of Registers Associated with pOWER-dOWN mODE
9.0 Watchdog Timer
- FIGURE 9-1: Watchdog Timer Block Diagram
- TABLE 9-1: WDT Operating Modes
- TABLE 9-2: WDT Clearing Conditions
- Register 9-1: WDTCON: Watchdog Timer Control Register
10.0 Flash Program Memory Control
- TABLE 10-1: Flash Memory Organization By Device
- FIGURE 10-1: Flash Program Memory Read Flowchart
- FIGURE 10-2: Flash Program Memory Read Cycle Execution
- FIGURE 10-3: Flash Program Memory Unlock Sequence Flowchart
- FIGURE 10-4: Flash Program Memory Erase Flowchart
- FIGURE 10-5: Block WRITES to Flash Program Memory With 32 write latches
- FIGURE 10-6: Flash Program Memory Write Flowchart
- FIGURE 10-7: Flash Program Memory Modify Flowchart
- TABLE 10-2: User ID, Device ID and Configuration Word Access (cfgs = 1)
- FIGURE 10-8: Flash Program Memory Verify Flowchart
- Register 10-1: PMDATL: Program Memory Data Low Byte Register
- Register 10-2: PMDATH: Program Memory Data hIGH bYTE Register
- Register 10-3: PMADRL: Program Memory Address Low Byte Register
- Register 10-4: PMADRH: Program Memory Address hIGH bYTE Register
- Register 10-5: PMCON1: Program Memory Control 1 Register
- Register 10-6: PMCON2: Program Memory Control 2 Register
- TABLE 10-3: Summary of Registers Associated with Flash Program Memory
- TABLE 10-4: Summary of cONFIGURATION wORD with Flash Program Memory
11.0 I/O Ports
- TABLE 11-1: Port Availability Per Device
- FIGURE 11-1: Generic I/O Port Operation
- TABLE 11-2: PORTA Output Priority
- Register 11-1: PORTA: PORTA Register
- Register 11-2: TRISA: PORTA Tri-State Register
- Register 11-3: LATA: PORTA Data Latch Register
- Register 11-4: ANSELA: PORTA Analog Select Register
- TABLE 11-3: Summary of Registers Associated with PORTA
- TABLE 11-4: Summary of cONFIGURATION wORD with PORTA
- TABLE 11-5: PORTB Output Priority
- Register 11-5: PORTB: PORTB Register
- Register 11-6: TRISB: PORTB Tri-State Register
- Register 11-7: LATB: PORTB Data Latch Register
- Register 11-8: ANSELB: PORTB Analog Select Register
- Register 11-9: WPUB: WEAK PULL-uP PORTB REGISTER
- TABLE 11-6: Summary of Registers Associated with PORTB
- TABLE 11-7: PORTC Output Priority
- Register 11-10: PORTC: PORTC Register
- Register 11-11: TRISC: PORTC Tri-State Register
- Register 11-12: LATC: PORTC Data Latch Register
- TABLE 11-8: Summary of Registers Associated with PORTC
- TABLE 11-9: PORTD Output Priority
- Register 11-13: PORTD: PORTD Register
- Register 11-14: TRISD: PORTD Tri-State Register
- Register 11-15: LATD: PORTB Data Latch Register
- TABLE 11-10: Summary of Registers Associated with PORTD(1)
- Register 11-16: PORTE: PORTE Register
- Register 11-17: TRISE: PORTE Tri-State Register
- Register 11-18: LATE: PORTE Data Latch Register
- Register 11-19: ANSELE: PORTE Analog Select Register
- Register 11-20: WPUE: WEAK PULL-uP PORTe REGISTER
- TABLE 11-11: Summary of Registers Associated with PORTE
12.0 Interrupt-On-Change
- FIGURE 12-1: Interrupt-On-Change Block Diagram
- Register 12-1: IOCBP: Interrupt-on-Change Positive Edge Register
- Register 12-2: IOCBN: Interrupt-on-Change Negative Edge Register
- Register 12-3: IOCBF: Interrupt-on-Change Flag Register
- TABLE 12-1: Summary of Registers Associated with Interrupt-on-Change
13.0 Fixed Voltage Reference (FVR)
- FIGURE 13-1: Voltage Reference Block Diagram
- TABLE 13-1: Peripherals Requiring the Fixed Voltage Reference (FVR)
- Register 13-1: FVRCON: Fixed Voltage Reference Control Register
- TABLE 13-2: Summary of Registers Associated with Fixed Voltage Reference
14.0 Temperature Indicator Module
- FIGURE 14-1: Temperature Circuit Diagram
- TABLE 14-1: Recommended Vdd vs. Range
15.0 Analog-to-Digital Converter (ADC) Module
- FIGURE 15-1: ADC Block Diagram
- TABLE 15-1: ADC Clock Period (Tad) Vs. Device Operating Frequencies
- FIGURE 15-2: Analog-to-Digital Conversion Tad Cycles
- FIGURE 15-3: 10-Bit A/D Conversion Result Format
- Register 15-1: ADCON0: A/D Control Register 0
- Register 15-2: ADCON1: A/D Control Register 1
- Register 15-3: ADRESH: ADC Result Register High (ADRESH) ADFM = 0
- Register 15-4: ADRESL: ADC Result Register Low (ADRESL) ADFM = 0
- Register 15-5: ADRESH: ADC Result Register High (ADRESH) ADFM = 1
- Register 15-6: ADRESL: ADC Result Register Low (ADRESL) ADFM = 1
- FIGURE 15-4: Analog Input Model
- FIGURE 15-5: ADC Transfer Function
- TABLE 15-2: Summary of Registers Associated with ADC
16.0 Timer0 Module
- FIGURE 16-1: Block Diagram of the Timer0
- Register 16-1: OPTION_REG: OPTION Register
- TABLE 16-1: Summary of Registers Associated with Timer0
17.0 Timer1 Module with Gate Control
- FIGURE 17-1: Timer1 Block Diagram
- TABLE 17-1: Timer1 Enable Selections
- TABLE 17-2: Clock Source Selections
- TABLE 17-3: Timer1 Gate Enable Selections
- TABLE 17-4: Timer1 Gate Sources
- FIGURE 17-2: Timer1 Incrementing Edge
- FIGURE 17-3: Timer1 Gate Enable Mode
- FIGURE 17-4: Timer1 Gate Toggle Mode
- FIGURE 17-5: Timer1 Gate Single-Pulse Mode
- FIGURE 17-6: Timer1 Gate Single-Pulse and Toggle Combined Mode
- Register 17-1: T1CON: Timer1 Control Register
- Register 17-2: T1GCON: Timer1 Gate Control Register
- TABLE 17-5: Summary of Registers Associated with Timer1
18.0 Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART)
- FIGURE 18-1: EUSART Transmit Block Diagram
- FIGURE 18-2: EUSART Receive Block Diagram
- FIGURE 18-3: Asynchronous Transmission
- FIGURE 18-4: Asynchronous Transmission (Back-to-Back)
- TABLE 18-1: Registers Associated with Asynchronous Transmission
- FIGURE 18-5: Asynchronous Reception
- TABLE 18-2: Registers Associated with Asynchronous Reception
- Register 18-1: TXSTA: Transmit Status AND Control REGISTER
- Register 18-2: RCSTA: Receive Status and Control Register
- Register 18-3: BAUDCON: BAUD RATE CONTROL REGISTER
- TABLE 18-3: Baud Rate Formulas
- TABLE 18-4: Registers Associated with Baud Rate Generator
- TABLE 18-5: BAUD Rates for Asynchronous Modes
- TABLE 18-6: BRG Counter Clock Rates
- FIGURE 18-6: Automatic Baud Rate Calibration
- FIGURE 18-7: Auto-Wake-up Bit (WUE) Timing During Normal Operation
- FIGURE 18-8: Auto-Wake-up Bit (WUE) Timings During Sleep
- FIGURE 18-9: Send Break Character Sequence
- FIGURE 18-10: Synchronous Transmission
- FIGURE 18-11: Synchronous Transmission (Through TXEN)
- TABLE 18-7: Registers Associated with Synchronous Master Transmission
- FIGURE 18-12: Synchronous Reception (Master Mode, SREN)
- TABLE 18-8: Registers Associated with Synchronous Master Reception
- TABLE 18-9: Registers Associated with Synchronous Slave Transmission
- TABLE 18-10: Registers Associated with Synchronous Slave Reception
19.0 Liquid Crystal Display (LCD) Driver Module
- FIGURE 19-1: LCD Driver Module Block Diagram
- TABLE 19-1: LCD Segment and Data Registers
- Register 19-1: LCDCON: Liquid Crystal Display (LCD) Control Register
- Register 19-2: LCDPS: LCD Phase Register
- Register 19-3: LCDREF: LCD Reference Voltage Control Register
- Register 19-4: LCDCST: LCD Contrast Control Register
- Register 19-5: LCDSEn: LCD Segment Enable Registers
- Register 19-6: LCDDATAn: LCD Data Registers
- FIGURE 19-2: LCD Clock Generation
- TABLE 19-2: LCD Bias Voltages
- FIGURE 19-3: LCD Bias VOltage Generation Block DIagram
- TABLE 19-3: LCD Internal ladder power modes (1/3 Bias)
- FIGURE 19-4: LCD Internal Reference Ladder power mode switching Diagram – Type A
- FIGURE 19-5: LCD Internal Reference Ladder power mode switching Diagram – Type A Waveform (1/2 MUX, 1/2 Bias Drive)
- FIGURE 19-6: LCD Internal Reference Ladder power mode switching Diagram – Type B Waveform (1/2 MUX, 1/2 Bias Drive)
- Register 19-7: LCDRL: LCD Reference Ladder Control Registers
- FIGURE 19-7: Internal reference and Contrast control Block Diagram
- TABLE 19-4: Common Pin Usage
- TABLE 19-5: Frame Frequency Formulas
- TABLE 19-6: Approximate Frame Frequency (in Hz) Using Fosc @ 8 MHz, Timer1 @ 32.768 kHz or LFINTOSC
- TABLE 19-7: LCD Segment Mapping Worksheet
- FIGURE 19-8: Type-A/Type-B Waveforms in Static Drive
- FIGURE 19-9: Type-A Waveforms in 1/2 MUX, 1/2 Bias Drive
- FIGURE 19-10: Type-B Waveforms in 1/2 MUX, 1/2 Bias Drive
- FIGURE 19-11: Type-A Waveforms in 1/2 MUX, 1/3 Bias Drive
- FIGURE 19-12: Type-B Waveforms in 1/2 MUX, 1/3 Bias Drive
- FIGURE 19-13: Type-A Waveforms in 1/3 MUX, 1/2 Bias Drive
- FIGURE 19-14: Type-B Waveforms in 1/3 MUX, 1/2 Bias Drive
- FIGURE 19-15: Type-A Waveforms in 1/3 MUX, 1/3 Bias Drive
- FIGURE 19-16: Type-B Waveforms in 1/3 MUX, 1/3 Bias Drive
- FIGURE 19-17: Type-A Waveforms in 1/4 MUX, 1/3 Bias Drive
- FIGURE 19-18: Type-B Waveforms in 1/4 MUX, 1/3 Bias Drive
- FIGURE 19-19: Waveforms and Interrupt Timing in Quarter-Duty Cycle Drive (Example – Type-B, Non-Static)
- TABLE 19-8: LCD Module Status During Sleep
- FIGURE 19-20: Sleep Entry/Exit when SLPEN = 1
- TABLE 19-9: sUMMARY OF Registers Associated with LCD Operation
20.0 In-Circuit Serial Programming™ (ICSP™)
- FIGURE 20-1: Vpp Limiter Example Circuit
- FIGURE 20-2: ICD RJ-11 Style Connector Interface
- FIGURE 20-3: PICkit™ Style Connector Interface
- FIGURE 20-4: Typical connection for ICSP™ programming
21.0 Instruction Set Summary
- TABLE 21-1: Opcode Field Descriptions
- TABLE 21-2: Abbreviation Descriptions
- FIGURE 21-1: General Format for Instructions
- TABLE 21-3: PIC16LF1904/6/7 Enhanced Instruction Set
- TABLE 21-3: PIC16LF1904/6/7 Enhanced Instruction Set (Continued)
22.0 Electrical Specifications
- FIGURE 22-1: Voltage Frequency Graph, -40°C £ Ta £ +125°C
- FIGURE 22-2: HFINTOSC Frequency Accuracy Over Device Vdd and Temperature
- FIGURE 22-3: POR and POR Rearm with Slow Rising Vdd
- FIGURE 22-4: Load Conditions
- TABLE 22-1: Clock Oscillator Timing Requirements
- TABLE 22-2: Oscillator Parameters
- FIGURE 22-5: CLKOUT and I/O Timing
- TABLE 22-3: CLKOUT and I/O Timing Parameters
- FIGURE 22-6: Reset, Watchdog Timer, Oscillator Start-up Timer and Power-up Timer Timing
- FIGURE 22-7: Brown-Out Reset Timing and Characteristics
- FIGURE 22-8: Minimum Pulse width for LPBOR Detection
- TABLE 22-4: Reset, Watchdog Timer, Oscillator Start-up Timer, Power-up Timer and Brown-Out Reset Parameters
- FIGURE 22-9: Timer0 and Timer1 External Clock Timings
- TABLE 22-5: Timer0 and Timer1 External Clock Requirements
- TABLE 22-6: PIC16LF1904/6/7 A/D Converter (ADC) Characteristics:
- TABLE 22-7: PIC16LF1904/6/7 A/D Conversion Requirements
- FIGURE 22-10: PIC16LF1904/6/7 A/D Conversion Timing (Normal Mode)
- FIGURE 22-11: PIC16LF1904/6/7 A/D Conversion Timing (Sleep Mode)
23.0 DC and AC Characteristics Graphs and Charts
24.0 Development Support
25.0 Packaging Information
Appendix A: Data Sheet Revision History
The Microchip Web Site
Customer Change Notification Service
Customer Support
Reader Response
Product Identification System
Worldwide Sales

 2011 Microchip Technology Inc. Preliminary DS41569A-page 153

PIC16LF1904/6/7

TABLE 17-5: SUMMARY OF REGISTERS ASSOCIATED WITH TIMER1

Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0

on Page

INTCON GIE PEIE TMR0IE INTE IOCIE TMR0IF INTF IOCIF

PIE1

TMR1GIE

ADIE RCIE TXIE — — —TMR1IE73

PIR1

TMR1GIF

ADIF RCIF TXIF — — —TMR1IF75

TMR1H Holding Register for the Most Significant Byte of the 16-bit TMR1 Register

147*

TMR1L Holding Register for the Least Significant Byte of the 16-bit TMR1 Register

147*

TRISC

TRISC7 TRISC6 TRISC5 TRISC4 TRISC3 TRISC2 TRISC1 TRISC0

109

T1CON

TMR1CS1 TMR1CS0 T1CKPS<1:0> T1OSCEN T1SYNC

—TMR1ON

151

T1GCON

TMR1GE T1GPOL T1GTM T1GSPM T1GGO/

DONE

T1GVAL T1GSS1 T1GSS0

152

Legend: — = unimplemented location, read as ‘0’. Shaded cells are not used by the Timer1 module.

* Page provides register information.