Datasheet

PIC16F913/914/916/917/946
DS41250F-page 82 © 2007 Microchip Technology Inc.
3.8.1 PIN DESCRIPTIONS AND
DIAGRAMS
Each PORTF pin is multiplexed with other functions. The
pins and their combined functions are briefly described
here. For specific information about individual functions,
refer to the appropriate section in this data sheet.
3.8.1.1 RF0/SEG32
Figure 3-29 shows the diagram for this pin. The RF0
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
3.8.1.2 RF1/SEG33
Figure 3-29 shows the diagram for this pin. The RF1
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
3.8.1.3 RF2/SEG34
Figure 3-29 shows the diagram for this pin. The RF2
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
3.8.1.4 RF3/SEG35
Figure 3-29 shows the diagram for this pin. The RF3
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
3.8.1.5 RF4/SEG28
Figure 3-29 shows the diagram for this pin. The RF4
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
3.8.1.6 RF5/SEG29
Figure 3-29 shows the diagram for this pin. The RF5
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
3.8.1.7 RF6/SEG30
Figure 3-29 shows the diagram for this pin. The RF6
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
3.8.1.8 RF7/SEG31
Figure 3-29 shows the diagram for this pin. The RF7
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD