Datasheet

© 2007 Microchip Technology Inc. DS41250F-page 255
PIC16F913/914/916/917/946
19.0 ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings
(†)
Ambient temperature under bias..........................................................................................................-40° to +125°C
Storage temperature ........................................................................................................................ -65°C to +150°C
Voltage on V
DD with respect to VSS ................................................................................................... -0.3V to +6.5V
Voltage on MCLR
with respect to Vss ............................................................................................... -0.3V to +13.5V
Voltage on all other pins with respect to V
SS ........................................................................... -0.3V to (VDD + 0.3V)
Total power dissipation
(1)
............................................................................................................................... 800 mW
Maximum current out of V
SS pin ....................................................................................................................... 95 mA
Maximum current into V
DD pin .......................................................................................................................... 95 mA
Input clamp current, I
IK (VI < 0 or VI > VDD)................................................................................................................±20 mA
Output clamp current, I
OK (Vo < 0 or Vo >VDD)..........................................................................................................±20 mA
Maximum output current sunk by any I/O pin.................................................................................................... 25 mA
Maximum output current sourced by any I/O pin .............................................................................................. 25 mA
Maximum current sourced by all ports (combined) ........................................................................................... 90 mA
Maximum current sunk by all ports (combined) ................................................................................................ 90 mA
Note 1: Power dissipation is calculated as follows: P
DIS = VDD x {IDD – ∑ IOH} + ∑ {(VDD – VOH) x IOH} + ∑(VOL x IOL).
2: PORTD and PORTE are not implemented in PIC16F913/916 devices.
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.