Datasheet

PIC16F88X
DS80000302H-page 10  2007-2013 Microchip Technology Inc.
7. Module: MSSP
When all of the following conditions are met:
1. The module is configured as a SPI slave
2. CKP = 1
3. CKE = 1
4. Multiple bytes are sent to the Slave with the
SS
line remaining low between bytes
The SSPIF flag will only be set on reception of the
first byte and the following bytes will not be
correctly received.
Work around
• SPI Master toggles the SS line between bytes
or
• On reception of the first byte, modify the
SSPM0 bit in the SSPCON register to
configure the module as a SPI slave with SS
pin disabled. Then, restore the SSPM0 bit to
the configuration for SPI slave with SS pin
enabled. The module is then ready for
reception of the following byte.
Affected Silicon Revisions
PIC16F882
PIC16F883/PIC16F884
PIC16F886/PIC16F887
A0
X
A0
X
A2
X
BSF SSPCON, SSPM0
BCF SSPCON, SSPM0