Datasheet

PIC16F785/HV785

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

ADFM VCFG CHS3 CHS2 CHS1 CHS0 GO/DONE

ADON

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 7 ADFM: A/D Result Formed Select bit

1 = Right justified

0 = Left justified

bit 6 VCFG: Voltage Reference bit

1 = V

REF pin

0 = V

bit 5-2 CHS<3:0>: Analog Channel Select bits

0000 = Channel 00 (AN0)

0001 = Channel 01 (AN1)

0010 = Channel 02 (AN2)

0011 = Channel 03 (AN3)

0100 = Channel 04 (AN4)

0101 = Channel 05 (AN5)

0110 = Channel 06 (AN6)

0111 = Channel 07 (AN7)

1000 = Channel 08 (AN8)

1001 = Channel 09 (AN9)

1010 = Channel 10 (AN10)

1011 = Channel 11 (AN11)

1100 =CV

REF

1101 =VR

1110 = Reserved. Do not use.

1111 = Reserved. Do not use.

bit 1 GO/DONE

: A/D Conversion Status bit

1 = A/D conversion cycle in progress. Setting this bit starts an A/D conversion cycle.

This bit is automatically cleared by hardware when the A/D conversion has completed.

0 = A/D conversion completed/not in progress

bit 0 ADON: A/D Enable bit

1 = A/D converter module is enabled

0 = A/D converter is shut-off and consumes no operating current