Datasheet

PIC16F785/HV785

U-0 R/W-1 R/W-1 R/W-0 R-q R-0 R-0 R/W-0

— IRCF2 IRCF1 IRCF0 OSTS

(1)

HTS LTS SCS

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 7 Unimplemented: Read as ‘0’

bit 6-4 IRCF<2:0>: Internal Oscillator Frequency Select bits

000 =31kHz

001 =125kHz

010 =250kHz

011 =500kHz

100 =1MHz

101 =2MHz

110 =4MHz

111 =8MHz

bit 3 OSTS: Oscillator Start-up Time-out Status bit

(1)

1 = Device is running from the external system clock defined by FOSC<2:0>

0 = Device is running from the internal system clock (HFINTOSC or LFINTOSC)

bit 3 PD

: Power-down bit

1 = After power-up or by the CLRWDT instruction

0 = By execution of the SLEEP instruction

bit 2 HTS: HFINTOSC (High Frequency – 8 MHz to 125 kHz) Status bit

1 = HFINTOSC is stable

0 = HFINTOSC is not stable

bit 1 LTS: LFINTOSC (Low Frequency – 31 kHz) Stable bit

1 = LFINTOSC is stable

0 = LFINTOSC is not stable

bit 0 SCS: System Clock Select bit

1 = Internal oscillator is used for system clock

0 = Clock source defined by FOSC<2:0>

Note 1: Bit resets to ‘0’ with Two-Speed Start-up and LP, XT or HS selected as the Oscillator mode or Fail-Safe

mode is enabled, otherwise this bit resets to ‘1’