Datasheet

PIC16F785/HV785
DS41249E-page 156 © 2008 Microchip Technology Inc.
FIGURE 19-8: CAPTURE/COMPARE/PWM TIMINGS (CCP)
TABLE 19-6: CAPTURE/COMPARE/PWM REQUIREMENTS (CCP)
Param
No.
Symbol Characteristic Min Typ† Max Units Conditions
50* TCCL CCP1 input low time No Prescaler 0.5TCY +
20
—— ns
With Prescaler 20 — — ns
51* T
CCH CCP1 input high time No Prescaler 0.5TCY +
20
—— ns
With Prescaler 20 — — ns
52* T
CCP CCP1 input period 3TCY + 40
N
— — ns N = prescale value
(1,4 or 16)
53* TCCR CCP1 output rise time — 25 50 ns
54* TCCF CCP1 output fall time — 25 45 ns
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note: Refer to Figure 19-2 for load conditions.
(Capture mode)
50 51
52
53 54
CCP1
(Compare or PWM mode)
CCP1