Datasheet

 2003-2013 Microchip Technology Inc. DS30498D-page 225
PIC16F7X7
FIGURE 18-10: CAPTURE/COMPARE/PWM TIMINGS (CCP1 AND CCP2)
TABLE 18-8: CAPTURE/COMPARE/PWM REQUIREMENTS (ALL CCP MODULES)
Note: Refer to Figure 18-4 for load conditions.
and RC2/CCP1
(Capture Mode)
50
51
52
53
54
RC1/T1OSI/CCP2
and RC2/CCP1
(Compare or PWM Mode)
RC1/T1OSI/CCP2
Param
No.
Symbol Characteristic Min Typ† Max Units Conditions
50* T
CCL CCP1, CCP2 and
CCP3 Input Low
Time
No prescaler 0.5 TCY + 20 — — ns
With prescaler PIC16F7X7 10 — — ns
PIC16LF7X7 20 — — ns
51* T
CCH CCP1, CCP2 and
CCP3 Input High
Time
No prescaler 0.5 TCY + 20 — — ns
With prescaler PIC16F7X7 10 — — ns
PIC16LF7X7 20 — — ns
52* T
CCP CCP1, CCP2 and CCP3 Input Period 3 TCY + 40
N
— — ns N = prescale
value (1, 4 or 16)
53* T
CCR CCP1, CCP2 and CCP3 Output
Rise Time
PIC16F7X7 — 10 25 ns
PIC16LF7X7 — 25 50 ns
54* T
CCF CCP1, CCP2 and CCP3 Output
Fall Time
PIC16F7X7 — 10 25 ns
PIC16LF7X7 — 25 45 ns
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and
are not tested.