Datasheet

 2010-2011 Microchip Technology Inc. DS41418B-page 95
PIC16(L)F707
REGISTER 11-1: DACCON0: VOLTAGE REFERENCE CONTROL REGISTER 0
R/W-0/0 R/W-0/0 R/W-0/0 U-0 R/W-0/0 R/W-0/0 U-0 U-0
DACEN DACLPS DACOE
—
DACPSS1 DACPSS0
— —
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared q = Value depends on condition
bit 7 DACEN: Digital-to-Analog Converter Enable bit
0 = Digital-to-Analog Converter is disabled
1 = Digital-to-Analog Converter is enabled
bit 6 DACLPS: DAC Low-Power Voltage State Select bit
0 =V
DAC = DAC negative reference source selected
1 =V
DAC = DAC positive reference source selected
bit 5 DACOE: DAC Voltage Output Enable bit
0 = DAC voltage level is output on the DACOUT pin
1 = DAC voltage level is disconnected from the DACOUT pin
bit 4 Unimplemented: Read as ‘0’
bit 3-2 DACPSS<1:0>: DAC Positive Source Select bits
00 =V
DD
01 =VREF
10 = FVR Buffer 2 output
11 = Reserved, do not use
bit 1-0 Unimplemented: Read as ‘0’
REGISTER 11-2: DACCON1: VOLTAGE REFERENCE CONTROL REGISTER 1
U-0 U-0 U-0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0
— — —
DACR4 DACR3 DACR2 DACR1 DACR0
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 DACR<4:0>: DAC Voltage Output Select bits