Datasheet

 2010-2011 Microchip Technology Inc. DS41418B-page 209
PIC16(L)F707
Power-down Base Current (IPD)
(2)
D027 — 0.06 0.7 5.0 A 1.8 A/D Current (Note 1, Note 4), no
conversion in progress
— 0.08 1.0 5.5 A3.0
D027 — 6 10.7 18 A 1.8 A/D Current (Note 1, Note 4), no
conversion in progress
— 7 10.6 20 A 3.0
— 7.2 11.9 22 A 5.0
D027A — 250 400 — A 1.8 A/D Current (Note 1, Note 4),
conversion in progress
— 250 400 — A3.0
D027A — 280 430 — A 1.8 A/D Current (Note 1, Note 4,
Note 5), conversion in progress
— 280 430 — A 3.0
— 280 430 — A 5.0
D028 — 2.2 3.2 14.4 A 1.8 Cap Sense Low Range
Low Power
—3.34.415.6A3.0
D028 — 6.5 13 21 A 1.8 Cap Sense Low Range
Low Power
— 8 14 23 A 3.0
— 8 14 25 A 5.0
D028A — 4.2 6 17 A 1.8 Cap Sense Low Range
Medium Power
—6 7 18A3.0
D028A — 8.5 15.5 23 A 1.8 Cap Sense Low Range
Medium Power
— 11 17 24 A 3.0
— 11 18 27 A 5.0
D028B — 12 14 25 A 1.8 Cap Sense Low Range
High Power
—3235 44 A3.0
D028B — 16 20 31 A 1.8 Cap Sense Low Range
High Power
— 36 41 50 A 3.0
— 42 49 58 A 5.0
D028C — 115 — — A 1.8 Cap Sense HighRange
Low Power (Note 6)
—120— — A3.0
D028C — 135 — — A 1.8 Cap Sense High Range
Low Power (Note 6)
— 140 — — A 3.0
— 150 — — A 5.0
25.3 DC Characteristics: PIC16(L)F707-I/E (Power-Down) (Continued)
PIC16LF707
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
PIC16F707
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Device Characteristics Min. Typ†
Max.
+85°C
Max.
+125°C
Units
Conditions
V
DD Note
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral current is the sum of the base I
DD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base I
DD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: Fixed Voltage Reference is automatically enabled whenever the BOR is enabled.
4: A/D oscillator source is F
RC.
5: 0.1 F capacitor on V
CAP (RA0).
6: Includes FVR IPD and DAC IPD.