Datasheet

PIC16F610/616/16HV610/616
DS41288F-page 168 © 2009 Microchip Technology Inc.
15.13 High Temperature Operation
This section outlines the specifications for the
PIC16F616 device operating in a temperature range
between -40°C and 150°C.
(4)
The specifications
between -40°C and 150°C
(4)
are identical to those
shown in DS41302 and DS80329.
TABLE 15-13: ABSOLUTE MAXIMUM RATINGS
Note 1: Writes are not allowed for Flash
Program Memory above 125°C.
2: All AC timing specifications are increased
by 30%. This derating factor will include
parameters such as T
PWRT.
3: The temperature range indicator in the
part number is “H” for -40°C to 150°C.
(4)
Example: PIC16F616T-H/ST indicates the
device is shipped in a t
APE and reel config-
uration, in the TSSOP package, and is
rated for operation from -40°C to 150°C.
(4)
4: AEC-Q100 reliability testing for devices
intended to operate at 150°C is 1,000
hours. Any design in which the total oper-
ating time from 125°C to 150°C will be
greater than 1,000 hours is not warranted
without prior written approval from
Microchip Technology Inc.
Parameter Source/Sink Value Units
Max. Current: V
DD Source 20 mA
Max. Current: V
SS Sink 50 mA
Max. Current: PIN Source 5 mA
Max. Current: PIN Sink 10 mA
Pin Current: at V
OH Source 3 mA
Pin Current: at VOL Sink 8.5 mA
Port Current: A and C Source 20 mA
Port Current: A and C Sink 50 mA
Maximum Junction Temperature 155 °C
Note: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure above maximum
rating conditions for extended periods may affect device reliability.