Datasheet

PIC16F610/616/16HV610/616
DS41288F-page 154 © 2009 Microchip Technology Inc.
15.9 DC Characteristics: PIC16F610/616/16HV610/616- I (Industrial)
PIC16F610/616/16HV610/616 - E (Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ T
A ≤ +125°C for extended
Param
No.
Sym Characteristic Min Typ† Max Units Conditions
D101* COSC2
Capacitive Loading Specs on
Output Pins
OSC2 pin
— — 15 pF In XT, HS and LP modes when
external clock is used to drive
OSC1
D101A* C
IO All I/O pins — — 50 pF
Program Flash Memory
D130 E
P Cell Endurance 10K 100K — E/W -40°C ≤ TA ≤ +85°C
D130A E
D Cell Endurance 1K 10K — E/W +85°C ≤ TA ≤ +125°C
D131 V
PR VDD for Read VMIN —5.5VVMIN = Minimum operating
voltage
D132 V
PEW VDD for Erase/Write 4.5 — 5.5 V
D133 T
PEW Erase/Write cycle time — 2 2.5 ms
D134 T
RETD Characteristic Retention 40 — — Year Provided no other
specifications are violated
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended to use an external
clock in RC mode.