Datasheet

PIC16F610/616/16HV610/616
DS41288F-page 146 © 2009 Microchip Technology Inc.
15.1 DC Characteristics: PIC16F610/616/16HV610/616-I (Industrial)
PIC16F610/616/16HV610/616-E (Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ T
A ≤ +125°C for extended
Param
No.
Sym Characteristic Min Typ† Max Units Conditions
V
DD Supply Voltage
D001 PIC16F610/616 2.0 — 5.5 V FOSC < = 4 MHz
D001 PIC16HV610/616 2.0 — —
(2)
V FOSC < = 4 MHz
D001B PIC16F610/616 2.0 — 5.5 V FOSC < = 8 MHz
D001B PIC16HV610/616 2.0 — —
(2)
V FOSC < = 8 MHz
D001C PIC16F610/616 3.0 — 5.5 V F
OSC < = 10 MHz
D001C PIC16HV610/616 3.0 — —
(2)
V FOSC < = 10 MHz
D001D PIC16F610/616 4.5 — 5.5 V FOSC < = 20 MHz
D001D PIC16HV610/616 4.5 — —
(2)
V FOSC < = 20 MHz
D002* VDR RAM Data Retention
Voltage
(1)
1.5 — — V Device in Sleep mode
D003 V
POR VDD Start Voltage to
ensure internal Power-on
Reset signal
—V
SS —VSee Section 12.3.1 “Power-on Reset
(POR)” for details.
D004* SVDD VDD Rise Rate to ensure
internal Power-on Reset
signal
0.05 — — V/ms See Section 12.3.1 “Power-on Reset
(POR)” for details.
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data.
2: User defined. Voltage across the shunt regulator should not exceed 5V.