Datasheet
2012 Microchip Technology Inc. Preliminary DS41652A-page 85
PIC16F527
15.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
Ambient temperature under bias..........................................................................................................-40°C to +125°C
Storage temperature ............................................................................................................................-65°C to +150°C
Voltage on V
DD with respect to VSS ...............................................................................................................0 to +6.5V
Voltage on MCLR
with respect to VSS..........................................................................................................0 to +13.5V
Voltage on all other pins with respect to V
SS ............................................................................... -0.3V to (VDD + 0.3V)
Total power dissipation
(1)
..................................................................................................................................700 mW
Max. current out of V
SS pin ................................................................................................................................200 mA
Max. current into V
DD pin...................................................................................................................................150 mA
Input clamp current, I
IK (VI < 0 or VI > VDD)20 mA
Output clamp current, I
OK (VO < 0 or VO > VDD) 20 mA
Max. output current sunk by any I/O pin ..............................................................................................................25 mA
Max. output current sourced by any I/O pin.........................................................................................................25 mA
Max. output current sourced by I/O port ..............................................................................................................75 mA
Max. output current sunk by I/O port ...................................................................................................................75 mA
Note 1: Power dissipation is calculated as follows: P
DIS = VDD x {IDD – IOH} + {(VDD – VOH) x IOH} + (VOL x IOL)
†
NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above
those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions
for extended periods may affect device reliability.