Datasheet
2010 Microchip Technology Inc. DS41326E-page 97
PIC16F526
15.0 DC AND AC CHARACTERISTICS GRAPHS AND CHARTS
The graphs and tables provided in this section are for design guidance and are not tested.
In some graphs or tables, the data presented are outside specified operating range (i.e., outside specified V
DD
range). This is for information only and devices are ensured to operate properly only within the specified range
“Typical” represents the mean of the distribution at 25C. “Maximum” or “minimum” represents (mean + 3) or (mean -
3) respectively, where s is a standard deviation, over each temperature range.
FIGURE 15-1: IDD VS. FOSC Over VDD (HS Mode)
Note: The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein are
not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore, outside the warranted range.
3.00
2.50
2.00
1.50
1.00
0.50
0.00
5
10
15
20
25
Max. 5V
Typical 5V
Max. 2V
Typical 2V
Fosc (MHz)
I
DD
(mA)
Typical: Statistical Mean @25°C
Maximum: Mean (Worst-Case Temp) + 3
(-40°C to 125°C)