Datasheet

PIC16(L)F1946/47
DS41414D-page 96  2010-2012 Microchip Technology Inc.
REGISTER 7-5: PIE4: PERIPHERAL INTERRUPT ENABLE REGISTER 4
U-0 U-0 R/W-0/0 R/W-0/0 U-0 U-0 R/W-0/0 R/W-0/0
— — RC2IE TX2IE — — BCL2IE SSP2IE
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared
bit 7-6 Unimplemented: Read as ‘0’
bit 5 RC2IE: USART2 Receive Interrupt Enable bit
1 = Enables the USART2 receive interrupt
0 = Disables the USART2 receive interrupt
bit 4 TX2IE: USART2 Transmit Interrupt Enable bit
1 = Enables the USART2 transmit interrupt
0 = Disables the USART2 transmit interrupt
bit 3-2 Unimplemented: Read as ‘0’
bit 1 BCL2IE: MSSP2 Bus Collision Interrupt Enable bit
1 = Enables the MSSP2 Bus Collision Interrupt
0 = Disables the MSSP2 Bus Collision Interrupt
bit 0 SSP2IE: Synchronous Serial Port (MSSP2) Interrupt Enable bit
1 = Enables the MSSP2 interrupt
0 = Disables the MSSP2 interrupt
Note: Bit PEIE of the INTCON register must be
set to enable any peripheral interrupt.