Datasheet

PIC16(L)F1938/9
DS40001574C-page 114  2011-2013 Microchip Technology Inc.
EXAMPLE 11-4: ERASING ONE ROW OF PROGRAM MEMORY
; This row erase routine assumes the following:
; 1. A valid address within the erase block is loaded in ADDRH:ADDRL
; 2. ADDRH and ADDRL are located in shared data memory 0x70 - 0x7F (common RAM)
BCF INTCON,GIE ; Disable ints so required sequences will execute properly
BANKSEL EEADRL
MOVF ADDRL,W ; Load lower 8 bits of erase address boundary
MOVWF EEADRL
MOVF ADDRH,W ; Load upper 6 bits of erase address boundary
MOVWF EEADRH
BSF EECON1,EEPGD ; Point to program memory
BCF EECON1,CFGS ; Not configuration space
BSF EECON1,FREE ; Specify an erase operation
BSF EECON1,WREN ; Enable writes
MOVLW 55h ; Start of required sequence to initiate erase
MOVWF EECON2 ; Write 55h
MOVLW 0AAh ;
MOVWF EECON2 ; Write AAh
BSF EECON1,WR ; Set WR bit to begin erase
NOP ; Any instructions here are ignored as processor
; halts to begin erase sequence
NOP ; Processor will stop here and wait for erase complete.
; after erase processor continues with 3rd instruction
BCF EECON1,WREN ; Disable writes
BSF INTCON,GIE ; Enable interrupts
Required
Sequence