Datasheet
2008-2011 Microchip Technology Inc. DS41364E-page 387
PIC16(L)F1934/6/7
30.3 DC Characteristics: PIC16(L)F1934/6/7-I/E (Power-Down)
PIC16LF1934/36/37
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial
-40°C T
A +125°C for extended
PIC16F1934/36/37
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
-40°C T
A +125°C for extended
Param
No.
Device Characteristics Min. Typ†
Max.
+85°C
Max.
+125°C
Units
Conditions
V
DD Note
Power-down Base Current (I
PD)
(2)
D023 — 0.06 1.0 8.0 A 1.8 WDT, BOR, FVR, and T1OSC
disabled, all Peripherals Inactive
— 0.08 2.0 9.0 A3.0
D023 — 21 55 63 A 1.8 WDT, BOR, FVR, and T1OSC
disabled, all Peripherals Inactive
— 25 58 78 A 3.0
— 27 60 88 A 5.0
D024 — 0.5 4.0 9.0 A 1.8 LPWDT Current (Note 1)
—0.85.0 10 A3.0
D024 — 23 57 65 A 1.8 LPWDT Current (Note 1)
— 26 59 80 A 3.0
— 28 61 90 A 5.0
D025 — 15 28 30 A 1.8 FVR current
—15 30 33 A3.0
D025 — 38 96 100 A 1.8 FVR current (Note 4)
— 45 110 120 A 3.0
— 90 140 155 A 5.0
D026 — 13 25 28 A 3.0 BOR Current (Note 1)
D026 — 40 110 120 A 3.0 BOR Current (Note 1, Note 4)
— 87 140 155 A 5.0
D027 — 0.6 5.0 9.0 A 1.8 T1OSC Current (Note 1)
—1.87.0 12 A3.0
D027 — 22 57 60 A 1.8 T1OSC Current (Note 1)
— 29 62 70 A 3.0
— 35 66 85 A 5.0
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral current is the sum of the base I
DD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral current can be determined by subtracting the base I
DD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: A/D oscillator source is F
RC.
4: 0.1 F capacitor on V
CAP (RA0).