Datasheet

PIC16(L)F1934/6/7
DS41364E-page 176  2008-2011 Microchip Technology Inc.
TABLE 17-1: SUMMARY OF REGISTERS ASSOCIATED WITH THE DAC MODULE
REGISTER 17-1: DACCON0: VOLTAGE REFERENCE CONTROL REGISTER 0
R/W-0/0 R/W-0/0 R/W-0/0 U-0 R/W-0/0 R/W-0/0 U-0 R/W-0/0
DACEN DACLPS DACOE
— DACPSS<1:0> — DACNSS
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared
bit 7 DACEN: DAC Enable bit
1 = DAC is enabled
0 = DAC is disabled
bit 6 DACLPS: DAC Low-Power Voltage State Select bit
1 = DAC Positive reference source selected
0 = DAC Negative reference source selected
bit 5 DACOE: DAC Voltage Output Enable bit
1 = DAC voltage level is also an output on the DACOUT pin
0 = DAC voltage level is disconnected from the DACOUT pin
bit 4 Unimplemented: Read as ‘0’
bit 3-2 DACPSS<1:0>: DAC Positive Source Select bits
00 =V
DD
01 =VREF+ pin
10 = FVR Buffer2 output
11 = Reserved, do not use
bit 1 Unimplemented: Read as ‘0’
bit 0 DACNSS: DAC Negative Source Select bits
1 =V
REF-
0 =V
SS
REGISTER 17-2: DACCON1: VOLTAGE REFERENCE CONTROL REGISTER 1
U-0 U-0 U-0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0
— — — DACR<4:0>
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 DACR<4:0>: DAC Voltage Output Select bits
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Register
on page
FVRCON FVREN FVRRDY TSEN TSRNG CDAFVR<1:0>
ADFVR<1:0> 156
DACCON0 DACEN DACLPS DACOE
— DACPSS<1:0> — DACNSS 176
DACCON1
— — — DACR<4:0> 176
Legend: — = Unimplemented location, read as ‘0’. Shaded cells are not used with the DAC Module.