Datasheet
2009 Microchip Technology Inc. Preliminary DS41364D-page 419
PIC16F193X/LF193X
30.3 DC Characteristics: PIC16F/LF1934/36/37-I/E (Power-Down)
PIC16LF1934/36/37
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial
-40°C T
A +125°C for extended
PIC16F1934/36/37
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
-40°C T
A +125°C for extended
Param
No.
Device Characteristics Min. Typ†
Max.
+85°C
Max.
+125°C
Units
Conditions
V
DD Note
Power-down Base Current (I
PD)
(2)
D023 — 0.06 1 — A 1.8 WDT, BOR, FVR, and T1OSC
disabled, all Peripherals Inactive
—0.08 2 — A3.0
D023 — 15 35 — A 1.8 WDT, BOR, FVR, and T1OSC
disabled, all Peripherals Inactive
— 18 40 — A 3.0
— 19 45 — A 5.0
D024 — 0.5 6 — A 1.8 LPWDT Current (Note 1)
—0.8 7 — A3.0
D024 — 16 35 — A 1.8 LPWDT Current (Note 1)
— 19 40 — A 3.0
— 20 45 — A 5.0
D025 — 8.5 23 — A 1.8 FVR current
—8.5 26 — A3.0
D025
— 32 50 — A 1.8 FVR current (Note 4)
— 39 72 — A 3.0
— 70 120 — A 5.0
D026 — 7.5 TBD — A 3.0 BOR Current (Note 1)
D026 — 34 57 — A 3.0 BOR Current (Note 1, Note 4)
— 67 100 — A 5.0
D027 — 0.6 5 — A 1.8 T1OSC Current (Note 1)
—1.8 6 — A3.0
D027 — 16 35 — A 1.8 T1OSC Current (Note 1)
— 21 40 — A 3.0
— 25 45 — A 5.0
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Legend: TBD = To Be Determined
Note 1: The peripheral current is the sum of the base I
DD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral current can be determined by subtracting the base I
DD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: A/D oscillator source is F
RC.
4: 0.1 F capacitor on V
CAP (RA0).